Liquid Liquid Coalescers - Liquid Coalescing Filters and SeparationChampion
Process, Inc. “LL” series cartridges are designed
to coalesce immiscible non-continuous phase liquids
from continuous phase liquids. As fluid passes across
the media the tiny suspended droplets of the non-continuous
phase are brought together into larger droplets.
These larger droplets respond faster to gravity
and the two phases separate.
Media choices include glass fiber, polyester,
and nylon 66. Micron ratings are available from
0.5 μm to 70 μm.
|
Typical Applications
- Removal of Water from Hydrocarbons
(Glass or Nylon)
- Removal of Amine from Hydrocarbons
(Nylon)
- Removal of Caustic from Hydrocarbons
(Nylon)
- Removal of Oil from Water
Phase (Depth Polyester)
- Removal of Water from Strong
Solvents (Nylon)
- Elevated Temperature Applications
(Nylon)
- Longer Service Life Requirements
(Pleated)
Performance
- Absolute Micron Rating: 0.5, 1,
5, 25, 40, 70
- Droplet Removal Efficiency: Up to
99.99%
- Will coalesce droplets as small
as 0.3μm
- Interfacial Tension (IFT) as low
as 10 dyne/cm
Specifications
- Maximum Temperature: 220°F, 300°F
(Nylon)
- Initial Pressure Drop: 1 - 2 psid
- Recommended Change out: 15 psid
- Inlet water concentration: up to
3% water (30,000 ppm)
- Lengths Available: 14.5” to 60”
- Outside diameters: 3.75”, 4.5”,
6”
- Core: Steel, Stainless, or Polymeric
- End caps: Threaded, O-ring, or DOE
- Media: Nylon 66, Glass Fiber, Depth
Polyester
|
New Horizontal
Coalescer Separator
Available for Rental or Purchase |
|
